Molecular sieve membrane equipment technology
The process flow
The raw material meets the requirements of film inlet and enters into the preheater and evaporator through the raw material pump. After reaching a certain temperature, it enters into the membrane separation unit in the form of steam. The membrane separation unit is composed of multiple membrane components in series. The water and a small amount of organic matter in the raw materials permeate through the membrane components from the upstream side of the membrane to the downstream side of the membrane, and the final product is obtained at the upstream side of the membrane. On the downstream side of the membrane, the vapor pressure difference between the upstream and downstream components of the membrane is formed by means of vacuum extraction and condensation. The percolating liquid vapor is pumped into the condenser by the vacuum unit. The condensed osmotic fluid is discharged through the osmotic pump and recycled.
CFD optimization of membrane components
Membrane module is the most important equipment in membrane separation technology, and the flow state of materials inside membrane module is an important factor affecting the separation effect of membrane module. CFD software is used to optimize the flow of fluid in the membrane module to obtain efficient membrane module.
Flow velocity distribution of components before and after CFD simulation optimization
Introduction to automatic control system
The control system takes Siemens programmable logic controller (PLC)+ Siemens human-machine interface (HMI) as the core, mainly including process flow chart, alarm parameter setting, operation parameter setting, accumulated running time, fault record and other human-machine dialogue screen, the system operation is simple and convenient.
Process flow chart reference interface